Specifications:
- Sleep Mode : Entered after 30 seconds of no activity.
- Operating Power: One CR2450 coin cell
- Battery life = ~1 year.
- BPM Range : 1 – 240
- Flashing Metronome Range : 30 – 240 (RokTempo 2)
- Accuracy +- 1 BPM
- Flashing Metronome Accuracy +- 1 BPM (RokTempo 2)
- Display : Seven Segment LEDs (Seven Segment LCD for RokTempo 2)
- Enclosure Size : L : 2.36 x W : 1.38 x H : 0.79″
To download the product manual click here
Warranty : 6 Months
The RokTempo & RokTempo 2 are warranted to be free of defects 6 months from the date of purchase. Please send an email to info@roktemp.com and an address will be provided for the return. Please also include your order number.
Refund Policy : 30 days
If for any reason you are not happy with the RokTempo or RokTempo 2 within 30 days from the date of purchase return it for a full refund. Please send an email to info@roktemp.com and an address will be provided for the return. Please also include your order number.
Troubleshooting
RokTempo displaying inconsistent tempos while using the DrumClip. Depending on the playing style it is possible that the RokTempo can pick up the kick drum if the threshold is set lower than 13. A setting 10 – 12 is usually used for playing lightly with brushes or sticks. It will also pickup ghost notes more easily at this setting causing inconsistent tempos. Use a setting of 13 – 20 if you are playing more of a moderate level, possibly higher if you are also playing ghost notes. Note : If the RokTempo is mounted directly to the drum the values mentioned above will be higher, start with a threshold of 15 for light playing and 20 or above for more if a moderate level.
How To Perform A Factory Reset for the original RokTempo
Follow these steps to perform a factory reset. For a video of how to perform a factory reset click here or here if purchased after July 2023
1. Make sure the the RokTempo is powered down, if not push the control knob until you see “Pd” (This will make sure it always start with step 1)
2. Power up by holding down the control knob until you see “Pu”.
3. Rotate the control knob until you get to 70 or above (this sets a new threshold so as to prevent it from triggering while setting the user modes).
4. Firmly tap the RokTempo to lock in the new threshold.
5. Push and release the control knob, this will be User Mode 1 (Avg Beats). Rotate the control knob until it displays a “1”. Push and release the control knob to lock in the setting. Note : Min number is 1 and max number is 8
6. Push and release the control knob again, this will be User Mode 2 (BPM Multiplier). Rotate the control knob until it displays a “1” . Push and release the control knob to lock in the setting. Note : Min Number is 1 and Max Number is 6.
7. Push and release the control knob again, this will be User Mode 3 (Settling Time). Rotate the control knob until it displays a “100”. Push and release the control knob to lock in the setting. Note : Min Number is 75 and Max number is 200.
8. Push and release the control knob again, this will be User Mode 4 (Brightness Control). Rotate the control knob until it displays a “40”. Push and release the control knob to lock in the setting. Note : Min Number is 10 Max number is 100.
9. Push and release the control knob again, this will be User Mode 5 (Battery Level reading) . Rotate the control knob until it displays “LbF”. Push and release the control knob to lock in the setting. Note : Rotating the Control know will display 1.5x LbF, Lbn, 1.5x, LbF, Lbn and etc. (Keeps repeating this sequence). Fi
10. Rotate the control knob back to between 10 to 20.
11. Firmly tap the RokTempo to lock in the new threshold, Now you are ready to monitor your tempo.
How To Perform A Factory Reset for the RokTempo 2
To restore the factory settings on the RokTempo 2, power it on and insert the end of the paper clip (or similar device) through the small hole located just below the control knob. Pressing and holding the small internal button until
“CL” is displayed (~2 sec), the factory reset is now complete.
